QoS | CAR, CIR, MIR, EIR, PIR, CDR

来源:本站原创 网络技术 超过6,311 views围观 0条评论

Several a day ago I posted about CIR how to calculate TC, this is list figure of rate, if there is wrong CMIIW (correct me if I wrong)
Committed Access Rate (CAR) is used to limit traffic that can enter or exit an interface.
Committed Information Rate (CIR) is minimum bandwidth that is guaranteed to work under normal conditions, at any time the bandwidth should not fall below.
Minimum Information Rate (MIR) is minimum bandwidth, the lowest information rate will be assigned where there is congestion.
Excess Information Rate (EIR) is burstable bandwidth, CIR plus excess burst rate.
Peak Information Rate (PIR) is bandwidth will may use during data bursts when there is excess bandwidth available and no congestion also mention maximum information rate (MaxIR/MIR).
Committed Data Rate (CDR) refers also to voice and non-data packets and not only to data packets as in CDR.
All rate figure in kilobits per second (kbit/s).

文章出自:CCIE那点事 http://www.jdccie.com/ 版权所有。本站文章除注明出处外,皆为作者原创文章,可自由引用,但请注明来源。 禁止全文转载。
本文链接:http://www.jdccie.com/?p=1656转载请注明转自CCIE那点事
如果喜欢:点此订阅本站
上篇文章:
下篇文章: